roo

I have the same problem. The best solution Ive found is a light pair of terry pants over the diaper and plastic pants. i know its pretty extreme, but have you considered doing some laundry for yourself? I have heard that modern washing machines are pretty easy to use. 😁

People with success growing a neo foreskin have shown that you need periods of comfortable stretch, followed by periods of relaxation to get tissue growth. So the day / night cycle might be for the best. (I wonder if that would also work with catheters.. ) Buttplugs dont stay put because they are a stupid shape. The neck is too short, and they dont accomodate the 90 degree bend after the sphincter. Look for something with a narrow flange, a long neck, and something very flexible. The square pegs eggs toys are pretty good.

I find it useful to drink small amounts but often. And I have a small drink everytime I pee. This tends to leads to me having up to forty little leaks into my diaper through the day. And sometimes it builds up slowly to an uncontrollable, overwelming flood. Think of trying to overwhelm your bodies supply of ADH, then keep yourself in a steady state of fluids in and fluids out. But also keep in mind the dangers of hyponaturia if it means you are drinking a lot of water. Try to keep your electrolytes up. And if you get a headache, stop and reach for a packet of salty snacks.

If you seek bowel incontinence I think you need to get used to the diaper rash. Thats certainly one reason I don't often use my diaper for poops. If its really bad, you might have a secondary fungal infection. If I get bad a combo of barrier cream and antifungal helps a lot.

The main thing to get right is the length of the neck. The necks on all buttplugs are too short, so that the flange is always being pulled into the butt making it uncomfortable to wear.

Ive got a new 'stent'. I don't think this is long term solution, but it's fun for a play session. I made a sort of chastity cage, the one where is the penis is held downwards in a snug tube, and everything else is hidden away behind a curved triangular plate. Its all held in place by straps. I drilled an 8mm hole into the end of the cage Then I inserted a catheter and inflated the baloon. Threaded through a safety tether, then did the classic clamp, trim, and plug, leaving an inch protuding. Then I threaded myself through the cage, with the cath end protuding from the 8mm hole in the cage and plugged and sewed in place a cap with a hole. (too large to fit back through the hole in the cage.) Strapped the cage on tightly and for good measure added skin coloured tape over the whole lot, so only the little black cap shows between my legs. Its a very comfortable and a very reliable drip and I'm enjoying lying in bed with the pee trickling down my bottom and making very wet pajamas and a big puddle in my bed. I guess its sort of leaves you like an incontinent nullo which I find pretty hot. I call it short term because the outlet is too close to the anus and I think it's only a short time till an infection. But maybe a holey foley might help there.

Not really long. I like to wear it overnight and into the morning so i"m nice and squishy after breakfast, then clean up in the shower and a clean diaper for the day. Its completely unnoticeable while I sleep, and never pops out.

I love no hair so much i got it lasered off. No need for that yukky hair. I still a very little hair growing there but its soft and isnt prickly when in comes through and gets gone with one swipe of the razor.

I went to an ageplay convention. After a few days of fun we changed, including underwear for the flight home. Then we got lunch with some friends before getting our taxi. Halfway through lunch I realised there was a big puddle under my chair. Even more embarrassing was my only pair of jeans were soaked so my friends put me in a diaper and overalls for my flight home. Ive often worn for long stretches without losing control, so that incident was really funny. Long periods in a slightly changed mind state must have had some effect.

It is made with 'plastimake' which is polycapralactone polymer. It is biologically inert, the material safety sheet says you can even eat it. It is a moldable, pliable modelling polymer. I bought the modelling variety. You just heat it in hot water and then you can model with it like stiff play-doh. When it cools it becomes strong and rigid. Its ridonkulously strong, with those wall thicknesses you could never break it by hand, and if it does deform it necks and becomes stronger as the polymer chains align, just like nylon does. They are easy to make. I take 100g of the polymer, heat it up, knead it and form it around to make a tube, then slowly model it to make that shape. That one took me about 20 minutes to create. You can reheat it to get it pliable again and modify it to get the perfect shape for your body.

I have done lots of experimention with commercially available hollow butt plugs to produce temporary anal incontinence. I've spent hundreds of dollars trying every model from the most expensive Oxballs to the cheapest chinese knockoff. But they all fail: either from being uncomfortable/painful, not retaining, not lining up to the rectum to pass stool, collapsing, impossible to insert, painful to insert, etc.. So I have taken all that onboard and designed and made the best transanal stent (hollow buttplug) in the world. I have made it from rigid polycaprolactone, and it's very strong and comfortable, but i expect if it was poured silicone, you wouldn't even know it was in. It takes a little to get it in. If you have less experience in anal play with good size toys, you might want to make it in a smaller size. The most important feature is the long stem (the anal sphincter is a long band of muscles, not a little donut) and the anatomical bend. Dont skimp on the length of the tail. If it's too short the stent is always being pulled outwards, which leads to instability and discomfort. I've worn this fellow overnight. Its very comfortable and very easy to sleep in.

It's interesting that such a little step is all that is required to provide stability. But I'm not sure I'm willing to trust glue. How strong do you find the silicone to silicone bond. Will it tear the base material before giving up?

Spargano, I look forward to seeing a picture of your new design, it sounds interesting. But I can't get my head around how the o-rings are attached and where they sit, and how they interact with the holes in the silicon tube.

I am pretty sure the original design back in 2010s had two seperate pieces for the bends and that the OP mentioned being able to slide them to change the length in the prostate.

Thats a really interesting design. The only thing that worries me is a medical case study i read once of someone who couldnt remove an inserted object because it had tied itself into an overhand knot in his bladder. This design looks like it could be prone to this.