knuffelknijntje

Going to upload this picture that was posted on this thread before (before the crash), not really shure who posted it first. But this to show new people what this thread was about. So: This is a stent, it has silicone tubing, nylon wire to retrieve it, silicone ring so the wire does not end up lost in the urethra. This variation has 4mm teflon tubing, but others use the 4mm pvc tubing found in spray bottles. The first bend is 45 degrees, and second is 60 degrees. Its bend using a heat gun. The extra hole in the bladder side is made, so incontinence is also better when laying down. The edges of the ends of the silicone tube are folded inward so they feel more smooth. The silicon tubing is 6mm, but one person also used silicone foley catheter ch18 to build this stent. All dimension can be found from the picture, but everyone is different, so some tuning for the right dimensions would be needed. Personally i think that the stickyness of silicone tubing also helps with the stent staying in place.

Am following this thread for a long time now, and after some time with catheters I am getting everything to build my own stent. But then I came across this,