![[DD] Boards & Chat](https://www.dailydiapers.com/board/uploads/monthly_2021_11/DDweb-02.png.0c06f38ea7c6e581d61ce22dffdea106.png)
 |
 |
ReggieRolf
-
Posts
9 -
Joined
-
Last visited
ReggieRolf's Achievements
Newborn (1/7)
6
Reputation
-
https://twitter.com/UraKerry/status/1772586434236420112?t=rcKWn2Z_9LcXMrle0koziQ&s=19 https://twitter.com/UraKerry/status/1772587005588693366?t=QHhSNudjFaelXy8xHq_YFA&s=19 This video how I insert the stent I made. Insert it with the bent side facing yourself. Keep your thumb pressed down at all times. Keep your index finger pressed down and tilt it. Keeping your head tilted, move your index finger down towards the base and it will go in naturally. ※This video shows my body and genitals. Please understand that I shouldn't post this directly here because of the skin contact.※
-
This stent is made from 2cm:1cm pipes and 2:2 pipes. The left side is the head and the right side is the part that is inserted. By making the head longer, it is less likely to damage the urethra when it moves. It feels less uncomfortable than before and I hardly notice any pain anymore. However, I think it needs some further improvements. Just now my diaper so wet hehe x3
- 1,201 replies
-
- 2
-
-
- stent
- incontinent
- (and 2 more)
-
https://twitter.com/UraKerry/status/1760936672319918520?t=ZeQQEirrFdAW5V2w9ZaekQ&s=19 If you want to know how to make my stent, it is posted here. I think you can find others if you do a search. For example, "ABDL stent". I believe that comrades always leave behind wisdom.💪 And may be him https://www.tumbex.com/ind247.tumblr/video
- 1,201 replies
-
- 3
-
-
- stent
- incontinent
- (and 2 more)
-
It is a metal pipe placed inside a tube. By inserting this, it fits into the bladder and urethra relatively well.
-
Good evening. I made my third stent. I think this is the best performance ever. Unlike before, I shortened the inside of the pipe from 2cm to 1cm in order to widen the cavity in the center. It was easier to get in and less painful than before. It's very comfortable, but when it's inserted into the bladder, it's a little long, so it sticks out a little behind the testicles, and it starts to feel uncomfortable after a while. I'm thinking of making it a little shorter than 10cm (about 4 inches).
-
Hello. I listened to a lot of advice and started over again. This time I halved the length and wove both heads inside so it would fit smoothly. It might come off because the bend is a little weak, but so far I don't have any pain when urinating after removing it, so I don't think there is any problem. I think I'll try it from a different angle after work.
- 1,201 replies
-
- 1
-
-
- stent
- incontinent
- (and 2 more)
-
I actually inserted a balloon catheter and checked the length. When I measured from the tip to the part that was protruding when not erect, it was exactly 30 cm (approximately 11.8 inches). ※For this length, I used an actual balloon catheter, not the stent shown in the photo.
-
Hello.Thank you for response me! Although I did not measure the exact length, I made it shorter than a normal balloon catheter. Should the cross section of the tube be smooth? I'm thinking about using sandpaper, but what do you think?
-
ReggieRolf changed their profile photo -
Hello. I will be participating from Japan. I saw this article and was very interested, so I tried making it myself through trial and error. I things didn't go well, and I had some bleeding by the stent I had just made, so I gave up. Do you have any tips for the angle or length? Please give me some advice.